The ILED-BH-R20W is the standard round 300mm bulkhead in the Halo range: two outputs on one body, 20W at 2200 lumens or 30W at 3300, both at 110 lumens per watt from LumiLEDs LM80 sources. The die-cast aluminium body with a PC diffuser is IP65-sealed and IK10 impact-rated, in white, black or grey. It runs on 220-240VAC or 110-277VAC, Class I wired, with DALI, motion sensor, standby sensor or emergency versions available factory-fitted. SAA, CE, RoHS and TUV certified, three-to-five-year warranty.
Category: Commercial LED Light , LED Bulkhead Light
Tags: 3CCT , Aluminum , Amenity Lighting , Area Lighting , Commercial Lighting , Emergency , IK10 , IP65
| Model | Wattage | Lumen Output | Dimensions |
| ILED-BH-R20W | 20W | 2200LM (110LM / W) | Ф300x90mm |
| ILED-BH-R30W | 30W | 3300LM (110LM / W) | Ф300x90mm |
| Input | 220V~240VAC/110-277VAC 50/60Hz | LED Source | LumiLEDs LM80 LEDs |
| Materials | Dia Dast Aluminum+ PC | PF | >0.9 |
| CCT | 2800-7000K | CRI | >80 |
| Electrical Classification | Class I | IP Class | IP65 |
| Beam angle | 120° | Body Color | White, Black or Gray Painted |
| Warranty | 3-5 years | Certification | CE&RoHS&SAA,TUV |
The ILED-BH-R20W is the base model of the Halo 300mm bulkhead family: a round ceiling-or-wall fitting for corridors, stairwells, carparks and building perimeters, where a sealed, impact-resistant light does the everyday work. Two outputs share the same body, so a building can run the brighter version where the ceiling is higher and the standard one everywhere else without changing the look. It is the fitting most people mean when they say bulkhead: round, sealed, tough, and mounted where the traffic is.
The 20W version puts out 2200 lumens and the 30W version 3300, both at 110 lumens per watt from LumiLEDs LM80 sources. The LED source is LM80-rated, which is the rating that says the chips have been tested for how their light holds up over time. Colour temperature spans 2800K to 7000K at order — warm for residential corridors, cooler for service areas — with colour rendering above 80.
The body is die-cast aluminium with a polycarbonate diffuser, gasket-sealed to IP65 against dust and water jets from any direction, and rated IK10 for impact — the top of the standard scale, which is what a fitting mounted at corridor or carpark height needs. The finish is white, black or grey painted. It is a surface mount for wall or ceiling, Class I wired, with the driver inside the body, so the install is the base plate, the terminal block and nothing else.
The fitting runs on 220-240VAC or 110-277VAC, so one product covers both regional supplies. Four functional versions are available factory-fitted: DALI dimming for buildings with a control system, a motion-sensor version, a standby motion-sensor version that runs the light at a low level until someone passes, and an emergency version that keeps the fitting lit through a power outage. These are fitted at the factory — they are not field retrofits, so the IP65 seal is never opened on site.
You need the wall or ceiling fixings suited to the surface and a switched circuit with a protective earth for the Class I connection. For a DALI version, the DALI power supply and controller are separate purchases; for the emergency version, the circuit must sit on the board that stays live for battery charging. An electrician handles the hardwired connection per local code.
This standard model is one of three on the same body. The MC version adds a microwave detector with the emergency function, for areas that need the light to come on without anyone touching anything. The Tri Guard version carries a reinforced cover over the diffuser for the positions that take harder hits. All three keep the same φ300×90mm silhouette and the same output options, so a building can step up the protection per area while the ceiling still reads as one scheme.
Corridors and stairwells in schools, offices and housing are the bread-and-butter positions. Carparks and loading bays take the IK10 body and the IP65 seal, day in and day out. Building perimeters and entrance ways use it as the weather-sealed amenity light, and with the DALI or sensor versions the running hours drop without anyone touching a switch. The anti-salty finish suits coastal installations where repainting is the usual cost.
The ILED-BH-R20W carries SAA for Australia and New Zealand, CE and RoHS for Europe, and TUV. The warranty runs three to five years depending on the region and version ordered. The sealed body needs no routine work inside; a wipe of the diffuser face during site maintenance keeps the output even.
Why do buyers pick these over the alternatives? Here is what we hear from customers:
IK10 and IP65 together. The top impact rating and a full weather seal on a 300mm fitting — corridors, carparks and perimeter walls, without needing a bigger housing.
LumiLEDs LM80 sources. The chips are tested for how their light holds up over time, which is what keeps the output and the colour stable across years of corridor and carpark running rather than months.
Two outputs, one silhouette. 20W or 30W on the same body, so a mixed-height building keeps one look and one spares list.
Four functional versions, factory-fitted. DALI, motion sensor, standby sensor or emergency — specified at order, with the seal opened only at the factory, so the IP65 rating the spec sheet promises is the rating the wall actually gets.
SAA, CE, RoHS and TUV. One product clears Australia, New Zealand and Europe with a test mark behind it.
Two, on the same φ300×90mm body: 20W at 2200 lumens and 30W at 3300, both at 110 lumens per watt. Pick per ceiling height; the mounting is identical.
The die-cast aluminium body is IK10 impact-rated — the top of the standard scale — and IP65-sealed against dust and water jets. That combination is what corridors, carparks and perimeter walls need.
Four, all factory-fitted: DALI dimming, a motion-sensor version, a standby motion-sensor version that runs at a low level until someone passes, and an emergency version that keeps lighting through a power outage. They are not field retrofits.
The range spans 2800K to 7000K, specified at order. Warm 2800K–3000K suits residential corridors and entrances; cooler settings suit service areas and stairwells. CRI is above 80.
220-240VAC or 110-277VAC, Class I wired, with the driver inside the body. No separate box to mount.
White, black or grey painted, all standard. White suits ceilings and light walls; black and grey sit better on exposed concrete and darker facades. The anti-salty finish suits coastal sites.
It runs the light at a low level continuously, then raises it to full when the sensor picks someone up. That is the usual setting for corridors and stairwells that must never go fully dark but do not need full output all night.
SAA for Australia and New Zealand, CE and RoHS for Europe, and TUV. The warranty runs three to five years depending on the region and version ordered.
The ILED-BH-R20W is the standard round 300mm bulkhead for the walls and ceilings that take the everyday knocks — inside and out.
Corridors and stairwells. Schools, offices and housing run it along the routes people use all day, with the standby sensor versions trimming the running hours after dark without the corridors ever going dark.
Carparks and loading bays. The IK10 body and IP65 seal take trolleys, vehicles and washdown day after day without the fitting ever becoming the maintenance item.
Building perimeters and entrances. The weather-sealed amenity light for the walls outside the door, in black, grey or white to match the facade.
Coastal installations. The anti-salty finish and sealed body resist the salt air that eats painted fittings, so the repainting cycle stretches out from every season to every few years.
Storage and service areas. A fitting that mounts at the height things get bumped, keeps its output, and needs nothing beyond an occasional wipe.
Emergency routes. The emergency version keeps the corridor and stair lit through a power outage, specified at order alongside the standard fittings on the same walls.
1. Can we install this bulkhead light outside wall?
Yes, you can.
2. Do we need to install them with earth wire?
Yes, it is electrical class I, must connec the earth wire.
3. Is it Yellowlish?
During 3 years, it is not yellowish because we use anti UV diffuser.
4. Can you emergency bulkhead light be self-test?
Yes, it is self test.
"We purchased Oval and Circle LED Bulkhead Lights in iLed from 2014. Over ten thousand of bulkhead lights in our projects during these years, they are working well. We have not received any complains from our clients. Thanks for these guys’ supportment. Good quality saves much maintainance cost for us."
"We met in lighting fair at 2018,and attracted by their products. Our clients like the powder coated of their bulkhead lights, and iLed developed CCT changeable version for us. It much helps us do the stock easily. The high lumen effective 110LM/W satisfy our clients. Top quality and reasonable price is for iLed."
"Everytime I gave the requirments from our clients to iLed from 2017, the guys feedback quickly with professional solutions. Different projects covered Triac dimmable, DALI, Emergency and Motion sensor of LED Bulkhead Lights. They always help us produce these bulkhead light fixtures before the period of construction."
"iLed helped us win many projects in Saudi Arabia. It was 345 pcs of emergency LED bulkhead lights for our first project in 2019. iLed gives us 2 years warranty for battery of emergency bulkhead lights. But they are work well until now. The guys told us they leave much space for the battery so that it is enough to the lost of battery capacity."
"We bought square 20W LED bulkhead lights for a school project from iLed. They were installed on the corridors ceiling. iLed quickly gave us the solution with square bulkhead lights with corridor motion sensor, which can be standby, not flicker, no blue light hazard. They are not only saving cost, but also safe to eyes."
"We used 20W Round LED Bulkhead Light for Hong Kong Central Library. The lights were installed on outside stair wall. We knew iLed did well IP65 waterproof and IK10 for this bulkhead light fixtures. The alumimum body is robust like the people of HongKong are strong and robust.They are working well more than 4 years."
"We purchased Oval and Circle LED Bulkhead Lights in iLed from 2014. Over ten thousand of bulkhead lights in our projects during these years, they are working well. We have not received any complains from our clients. Thanks for these guys’ supportment. Good quality saves much maintainance cost for us."
"We met in lighting fair at 2018,and attracted by their products. Our clients like the powder coated of their bulkhead lights, and iLed developed CCT changeable version for us. It much helps us do the stock easily. The high lumen effective 110LM/W satisfy our clients. Top quality and reasonable price is for iLed."
"Everytime I gave the requirments from our clients to iLed from 2017, the guys feedback quickly with professional solutions. Different projects covered Triac dimmable, DALI, Emergency and Motion sensor of LED Bulkhead Lights. They always help us produce these bulkhead light fixtures before the period of construction."
"iLed helped us win many projects in Saudi Arabia. It was 345 pcs of emergency LED bulkhead lights for our first project in 2019. iLed gives us 2 years warranty for battery of emergency bulkhead lights. But they are work well until now. The guys told us they leave much space for the battery so that it is enough to the lost of battery capacity."
"We bought square 20W LED bulkhead lights for a school project from iLed. They were installed on the corridors ceiling. iLed quickly gave us the solution with square bulkhead lights with corridor motion sensor, which can be standby, not flicker, no blue light hazard. They are not only saving cost, but also safe to eyes."
"We used 20W Round LED Bulkhead Light for Hong Kong Central Library. The lights were installed on outside stair wall. We knew iLed did well IP65 waterproof and IK10 for this bulkhead light fixtures. The alumimum body is robust like the people of HongKong are strong and robust.They are working well more than 4 years."
"We purchased Oval and Circle LED Bulkhead Lights in iLed from 2014. Over ten thousand of bulkhead lights in our projects during these years, they are working well. We have not received any complains from our clients. Thanks for these guys’ supportment. Good quality saves much maintainance cost for us."
"We met in lighting fair at 2018,and attracted by their products. Our clients like the powder coated of their bulkhead lights, and iLed developed CCT changeable version for us. It much helps us do the stock easily. The high lumen effective 110LM/W satisfy our clients. Top quality and reasonable price is for iLed."
"Everytime I gave the requirments from our clients to iLed from 2017, the guys feedback quickly with professional solutions. Different projects covered Triac dimmable, DALI, Emergency and Motion sensor of LED Bulkhead Lights. They always help us produce these bulkhead light fixtures before the period of construction."
"iLed helped us win many projects in Saudi Arabia. It was 345 pcs of emergency LED bulkhead lights for our first project in 2019. iLed gives us 2 years warranty for battery of emergency bulkhead lights. But they are work well until now. The guys told us they leave much space for the battery so that it is enough to the lost of battery capacity."
"We bought square 20W LED bulkhead lights for a school project from iLed. They were installed on the corridors ceiling. iLed quickly gave us the solution with square bulkhead lights with corridor motion sensor, which can be standby, not flicker, no blue light hazard. They are not only saving cost, but also safe to eyes."
"We used 20W Round LED Bulkhead Light for Hong Kong Central Library. The lights were installed on outside stair wall. We knew iLed did well IP65 waterproof and IK10 for this bulkhead light fixtures. The alumimum body is robust like the people of HongKong are strong and robust.They are working well more than 4 years."
Commercial LED Light
Commercial LED Light
Commercial LED Light
Commercial LED Light
All of our LED lighting solutions can be customised to your needs. We also offer free, no-obligation consultations, prototype development, sample testing and can assist with your development projects.
Simply contact us with your special requirements and our experts will gladly help you find the best solution for your project.