Q1 is a solar road stud is a small device that uses solar power to light up and improve visibility on the road. It is durable, can withstand harsh weather conditions, and has a battery that can operate in extreme temperatures. The device emits bright light that can be seen from up to 500 meters away and can handle heavy traffic. It comes in different types for various applications, such as inground lights and traffic safety lighting.
CLICK HERE TO SEND INQUIRY
Description
1. Polycarbonate body: Polycarbonate is a durable and lightweight plastic material that can withstand impact and extreme weather conditions, making it a good choice for outdoor applications like road studs.
2. IP68 waterproof: IP68 is a rating that indicates the degree of protection against dust and water ingress. A device with an IP68 rating is fully protected against dust and can be submerged in water up to 1.5 meters deep for a limited time without damage.
3. Anti-high and anti-low temperature Ni-MH battery: This refers to the type of battery used in the solar road stud. Ni-MH batteries are known for their durability and ability to operate in extreme temperature conditions.
4. Branded LEDs: Branded LEDs typically refer to high-quality LED chips that are manufactured by a well-known brand. These LEDs are likely to be brighter and more reliable than generic LEDs.
5. Strong visibility 500 meters: This refers to the distance at which the solar road stud can be seen by drivers. A visibility range of 500 meters is quite good and can help improve road safety.
6. Working environment -20-70℃: This indicates the range of temperatures in which the solar road stud can operate effectively. The range of -20 to 70 degrees Celsius covers a wide range of temperatures and suggests that the device is designed to function in a variety of climates.
7. Load bearing 20 tons: This refers to the amount of weight that the solar road stud can withstand without being damaged. A load-bearing capacity of 20 tons is quite high and indicates that the device is suitable for use on heavy traffic roads.
8. Solar supply: This means that the solar road stud is powered by solar energy, which is collected during the day and used to power the device at night.
Size | φ123*23MM | Material | Polycarbonate |
Solar panel | 2V/0.3W mono-crystalline silicon | Storge device | 1.2V/600mAh NI-MH |
Led color | red/white/yellow/blue/green | LED | Epistar brand, Dia 5mm, 3pcs/side |
Visibility | 500m(approx) | Life | 2 years with battery |
Working Temperature | -30℃~+70℃ | Working time: | 180 hrs for flashing, 40 hrs for steady |
unit weight | 0.39KG | load bearing | 20 tones |
Solar road stud light is a small, solar-powered device that is installed on roads and highways to improve visibility and safety. It is typically designed to be used in areas where traditional street lights may not be practical or cost-effective.
The solar road stud light is equipped with light-emitting diodes (LEDs) that are powered by a small solar panel, which collects energy from the sun during the day and stores it in a rechargeable battery inside the device. At night, the LEDs automatically turn on and emit a bright, highly visible light that can help drivers see the road and stay on course.
Solar road stud lights are often used to mark the edges of roads, pedestrian crossings, bike lanes, and other areas where visibility is critical. They are designed to be weather-resistant, durable, and able to withstand heavy traffic and harsh environmental conditions. Some models may also have features such as sensors that can detect when a vehicle is approaching and adjust the light output accordingly.
Exterior IP67 LED Wall Washer Light X5 18W 24W 36W 48W for Facade Landscape Lighting
12V 24V 10-36V Low Voltage LED Bulb Light for Solar System
Halo LED Bulkhead Light Round 300mm Lighting Waterproof IP65 20W Emergency Sensor DALI
LED Track Light 4 Wires 3 Phase COB 15W 30W 45W CRI 92 97 for Museum Shop Store Lighting
Mini Neon LED Lights 4mmx10mm CRI90 Side Lighting
Eyelid LED Bulkhead Light Aluminium Waterproof IP65 15W Emergency Sensor DALI
IP65 LED Batten Light 600mm 1200mm 1500mm 20-60W Emergency Sensor DALI
Top Class Recessed COB LED Downlight 3-8 inch 10-40W for Commercial Lighting
Custom LED Linear Light Pendant Flush Mount Ceiling for Office Lighting
LED Panel Light 40W 595 x 595 Slim Dimmable DALI Emergency 100LM/W
> DIY Any Shape by LED Linear Light for Commercial Lighting
> Why do we use LED light with standby motion sensor?
> How to Replace LED Track Light Fixture in a Shop Retail Store?
> How to Replace LED Track Light Fixture in a Shop Retail Store?
> Question for Emergency LED Bulkhead Light
> What advantages does COB LED Strip Light have?
> How to buy Power Supply for COB LED Strip Light?
> IP65 330mm White Circle Induction 18W LED Ceiling Light
> Solar Road Studs Reflective Red Green Amber Cat Eye Stud on a Motorway Highway Slip
> Solar Road Stud Light Square LED Reflective Red Green Amber Cat Eye for Road Safety
> Exterior IP67 Waterproof 24W 36W 48W RGBW DMX LED Wall Washer Light
> Exterior IP67 LED Wall Washer Light X5 18W 24W 36W 48W for Facade Landscape Lighting
Add:9th Building,Henglong Industrial Park,Shuitian 4th Industrial Area,Shuitian,Baoan District,Shenzhen,Guangdong,China
Tel:+86-755-89669574
Mobile:+86-15899789423Email:sales@iled-lights.com
© 2012-2021 iLed Tech Company Limited. All rights reserved.
SitemapCOB LED Strip Lights | DALI Lighting | Festoon String Lights | Large Pendant Lighting